Back to top
Industrial Vibro Sifter

Industrial Vibro Sifter

80000.00 - 300000.00 INR/Piece

Product Details:

X

Industrial Vibro Sifter Price And Quantity

  • 80000.00 - 300000.00 INR/Piece
  • 1 Piece

Industrial Vibro Sifter Trade Information

  • 4 Piece Per Month
  • 2-4 Days
  • All India
  • ISO : 9001 , 2008

Product Description

S.S. ENGINEERING VIBRO SIFTER is used to separate different sizes of solid particles.

The principle of working Vibro Sifter is to separate the solid material through a Vibrating sieve.

The top weight on the motor shaft rotates in a plane close to the centre of the Motor assembly plate.

The rotation of the top eccentric weights create a vibration in the horizontal plane which causes the material to move across the screen cloth to periphery increasing the horizontal throw causing oversize material to discharge at a faster rate. 

The bottom eccentric weight rotates below the centre of the plate creating tilt on the screen giving vibration in the vertical and tangential plane. Increasing the vertical component of motion, this promotes turn over of material on the screen surface helping the maximum quantity of undersize material to pass through the screen. Rugged Springs placed over the circular motor base amplifies the vibration.

Salient Features

  • Double and triple deck arrangement can be provided
  • Faster output and low power consumption
  • Easy dismantling and cleaning
  • All contact parts made of S.S.304 or S.S.316
  • Wide range of screen size 30 to 300 mesh
  • Standard motor with TEFC explosion proof /flame proof
  • Quick opening clamps where frequent opening is necessary due to requirement of cleaning 

 SIFTER  24 inch Dia  36 inch Dia  48 inch Dia
 Over all Dimensions  800 mm L X 750mm W X 1250 mm H  1150mm L X 1150 mm W X 1000 mm H  1450 mm L X 1450 mm W X 1450 mm H
 Weight  90 to 200 kgs  150 to 300 kgs  300 to 500 Kgs
 Speed ( R.P.M.)  1440 RPM   1440 RPM  1440 RPM
 Utility Requirement Electricity  0.5 ph 50 Hz, 415 volts  3 ph 50 Hz, 415 volts  3 ph 50 Hz, 415 volts
 Top lid Provided  Conical in shape with hopper  Conical in shape with hopper  Conical in shape with hopper
 Electrical Requirement  0.5 hp  0.5 hp  1.5 hp
 Power Supply  3 phase 440V A. C.  3 phase 440V A. C.  3 phase 440V A. C.
 Total Electrical Load  0.5 hp  0.5 hp  1.5 hp
 Clamps, Ring, Side Covers, etc MOC SS 304/SS 316  SS304/SS 316  SS304/SS 316
 Gasket  PTFE / Food Grade Neoprene  PTFE / Food Grade Neoprene  PTFE / Food Grade Neoprene
 Surface Finish  Inside outside   Inside outside   Inside outside
 M. S. Parts  Painted  Painted  Painted

Enter Buying Requirement Details
Email Id
Mobile number


trusted seller