Hydro Extractor
3 POINTCENTRIFUGE
MANUAL TOPDISCHARGE CENTRIFUGE
S.S Engineering, Manual TopDischarge type of Centrifuge is the basic type of Centrifuge or solid liquidseparation. It contains Basket which is dynamically balance in which a filterbag is placed which retains the solid within the basket. The discharge of thesolid cake is from the top which is done manually. It is a three pointsuspension under driven centrifuge.
The main parts of the Centrifuge areBearing and Shaft, Basket, Drive and Brake.
BEARING ANDSHAFT
Heavy duty bearing is chosen towithstand vibratory load and centrifugal forces duly fitted in bearing housing.The bearing housing is so designed and filled with grease ensuring longmaintenance free performance. The shaft is made up of suitable material andduly balanced independently without the basket for higher accuracy.
BASKET:
The basket is made up of adequate thickness so as to withstand the loads causedby the centrifugal forces developed by material in the basket. It is perforatedand duly balanced. The basket bottom is made up of Mild Steel and lined at theinner surface by Rubber or SS as required.
DRIVE:
The drive consists of Motor mounted at the basket casing driven through V beltwith provision of the tensioning the belts. Model SS-24â & SS-36â & SS-60â centrifuges arefitted with Mechanical Clutch pulley at the motor shaft.
BRAKE:
The Centrifuge are fitted with external shoe brakes with brake liners. Thebrakes are heavy duty type designed to bring loaded basket to stop quickly.
TECHINCAL SPECIFICATIONS
MODEL |
SS-24 |
SS-36 |
SS-48 |
SS-60 |
Basket Diameter mm |
600 |
900 |
1200 |
1500 |
Depth mm |
300 |
425 |
500 |
500 |
Max.Basket Revolution RPM |
1000 |
1000 |
900 |
800 |
Filteration Area Mtrs2 Area |
0.56 |
1.2 |
1.88 |
2.36 |
Motor H.P |
3 |
7.5 |
15 |
20 |
Rated Charge in Basket Ltrs |
50 |
140 |
280 |
400 |